Loading... Please wait...
  • Anti-Microbial - Stainless Wall Guard (set of two) (89S)
  • Anti-Microbial - Stainless Wall Guard (set of two) (89S)
  • Image 3

Anti-Microbial - Stainless Wall Guards (89S)

$180.00
$200.00 (You save $20.00)
SKU: 89S
Brand:
Excel Dryer
Weight:
6.00 LBS
Shipping:
Calculated at checkout
Qty

    Anti-Microbial - Stainless Wall Guard (set of two)

    MICROBAN® Wall Guards are designed specifically to fit securely underneath your XLERATOR hand dryers, protecting your walls from water droplets that can be blown off wet hands by the powerful air stream of the XLERATOR.

    Please call (877) 376-2863 (M-F, 8 a.m. - 5 p.m. EST) or send us a message through our contact form HERE for volume discounts or assistance with special orders.

    SPECIFICATIONS

    Qty: 2 per set 
    Size: 31 ¾” x 15 ¾” x 1⁄16”

    INSTALLATION:

    Mounted with 4 strips of construction grade 3M adhesive tape

    MATERIALS

    MICROBAN anti-microbial plastic: brushed stainless steel

    INSTALLATION INSTRUCTIONS

    1. Clean the wall surface with ISOPROPYL ALCOHOL prior to installation and make sure that the surface is dry and free of any dust and debris.
    2. Center the Wall Guard underneath the hand dryer so that the top of the Wall Guard is 1” below the bottom of the dryer.
    3. Carefully measure and mark the wall surface for placement of the Wall Guard with a pencil or temporary marker.
    4. Four strips of double-sided adhesive are included for each panel. Note: Alignment is critical. Once placed on the wall, the Wall Guard cannot be re-positioned. Apply the tape strips to textured side of black or white panel and smooth side of brushed stainless panel as follows:

    • Lay out tape strips according to illustration at left. 
    • Remove one strip and apply to either right or left side to start. 
    • Press each tape strip firmly onto the plastic as it is applied. 
    • Continue until all 4 strips are applied.

    5. Align the top edge of the Wall Guard with the markings on the wall and firmly press into place against the entire surface of the Wall Guard.
    6. Optional: After guard is applied to the wall you may add silicone sealant around the edge.

    CLEANING INSTRUCTIONS

    Clean the installed Wall Guard with mild soapy water and a soft cloth. Mild dish soap mixed with water in a spray bottle works best.
    DO NOT USE any cleaner that contains any ammonia or abrasive cleansers to clean the surface.

    NATIONAL INSTALLATION SERVICES AVAILABLE CALL FOR DETAILS (877) 376-2863

    Installing the Wall Guard (2:33)

    Shipping Options:
    Purchasing this product a la carte does not include free shipping. If you are planning on purchasing an XLERATOR or XLERATOReco, add this accessory to your order for free shipping.
    Shipping Rates:
    To calculate your preferred shipping method, please view your cart and enter your ship to information.
    Shipping Method:
    UPS is our preferred shipping method. If another option works better, please contact us at 877-376-2863 or via our Contact Form to make arrangements.
    XLERATOR® - Original, Patented and Still the Best (02:12)
    • XLERATOR® - Original, Patented and Still the Best
    • Surface Mount Technology Installation - Excel Dryer (Video 1)

    This product hasn't received any reviews yet. Be the first to review this product!

    Write your own product review

    Sign up for our newsletter

    View Cart Go To Checkout